How to draw this beam?

ammer

Kıdemli Üye

• 7 Ağu 2017

• #1

hello all friends
I got an issue while drawing this beam between inclined wall and the elevator's wall,
i received the short entities .
need your recommends
thanks

 

Ekli dosyalar

• 
  2017-08-07_230937.jpg

  290.3 KB · Görüntüleme: 2,319

M.Berat Denli

Tanınmış Üye

• 8 Ağu 2017

• #2

Hi ;

You can draw a beam between two wall.
I cant understand your problem by the way.
Can you explain problem? What do u mean "i recived the short entities" ?

 

NYILMAZ

Kıdemli Üye

• 8 Ağu 2017

• #3

Dear Ammer,
Please send your progeny.
I think you want to draw beams, but small pieces are forming.
I draw a beam there and send it.

 

İsmail Hakkı BESLER

Administrator

• 8 Ağu 2017

• #4

W18 shearwall has small angle. ( not 90 degrees) erased thiswall and create new wall and beam.

 

ammer

Kıdemli Üye

• 8 Ağu 2017

• #5

hello all friends
below attaches for building

 

Ekli dosyalar

• MOSTAFABASHER7STORY.ide85

  789 KB · Görüntüleme: 384

NYILMAZ

Kıdemli Üye

• 8 Ağu 2017

• #6

i think, your problem is solved

 

Ekli dosyalar

• MOSTAFABASHER7STORY ny.ide85

  731.3 KB · Görüntüleme: 376

ammer

Kıdemli Üye

• 8 Ağu 2017

• #7

hello NYILMAZ bye
thanks to your efforts
but ,would you please show me how did you solve it? :shock: :shock: :shock: :shock:
thanks again

 

ammer

Kıdemli Üye

• 8 Ağu 2017

• #8

hello dear
how to solve the"wrong possible angle"??

 

Ekli dosyalar

• 
  2017-08-06_231657.jpg

  261.4 KB · Görüntüleme: 2,261

NYILMAZ

Kıdemli Üye

• 9 Ağu 2017

• #9

There were some errors. İ solved. But others do not have to be corrected.
N.Y.

 

ammer

Kıdemli Üye

• 9 Ağu 2017

• #10

hello N.Y
many thanks